Transverter setup

[PE2V]

Hello,

I'm using since a couple of days 2 transverters for VHF and UHF. With the transverter offset option /setting in RUmlogNG this works great. But... the transverters have a different offset. 116MHz for VHF and 404MHz for UHF

What I did: I use TRX#1 settings for VHF and TRX#2 for the UHF settings. I can switch between these to transverters by disable TRX#1 and enable TRX#2 for UHF etc... for VHF. This works fine for me!!

The only question I have is, is this the best way to do or is there an other easier way to switch?

Thanks, Vincent PE2V

[PE2V]

Ok, I found an other option to do; save the setup in the presets.... yes. More easy

> Preset 1 144MHz offset 116MHz
> Preset 2 432MHz offset 404MHz

EDIT: the Transverter# On/Off is not saved in the preset. Is this possible? Absolutely not necessary but for lazy people
How it works now 1) enable Transverter in the Transceiver menu and 2) select 144MHz or 432MHz in the Transceiver preset menu.

Thanks!!

[DL2RUM]

I will add it with the next update.

[PE2V]

I will add it with the next update.

Thanks!!