Pseudo FSK

[IV3TMM]

Hi, how to run pseudo FSK with FLDigi and RUMLogNG ? Still not able to run it after various tests.
AFSK is working well with no problem.
Any solutions ?
Thanks de IV3TMM.

[DL2RUM]

I use a microHAM digiKeyerII, works fine for pseudo FSK. What interface do you use?

[IV3TMM]

TNX Tom, yes me too, i use DigiKeyer II by Microham.
Could you help me ?
I can send you pictures of my settings.
Ciao.
IV3TMM.

[DL2RUM]

To help you, we need to see your Fldigi and microHAM settings Find attached my settings. Make sure you are using the same sample rates for the sound card in- and output.

1.tiff (366.91 KiB) Viewed 8878 times

1.tiff (366.91 KiB) Viewed 8878 times

2.tiff (33 KiB) Viewed 8878 times

2.tiff (33 KiB) Viewed 8878 times

3.tiff (28.7 KiB) Viewed 8878 times

3.tiff (28.7 KiB) Viewed 8878 times

4.tiff (28.51 KiB) Viewed 8878 times

4.tiff (28.51 KiB) Viewed 8878 times

[IV3TMM]

TNX Tom, but it' s not running.
Everything is working PTT and modulation but i listen only DIDIDIDIDIDI in monitor mode during the transmission in RTTY mode.
If i change on SSB mode i listen the right RTTY modulation.
Seems that FLDIGI still transmit on AFSK even if i selected Pseudo FSK.

[DL2RUM]

AFSK may be still present on the left channel. Is the FSK LED flickering on the DKII? Is the DKII in FSK mode?

[IV3TMM]

Yes the FSK LED is flickering when transmitting.
How to check if the DGKII is in FSK mode ?

I miss, .... when i send Memory 3 saved in DGKII with RYRYRY with RumLogNG, everything is fine.

[DL2RUM]

To see the DKII mode, open the microHAM window: Menü-->Window-->microHAM
When the FSK is flickering, it looks good.

[IV3TMM]

Yes, all is OK, but FSK is orange color, that' s right ?
See picture-
TY.

[DL2RUM]

Correct