www.dl2rum.de

On 40 meters the frequency window turns red above 7.200 MHz (should be above 7.300 MHz). If my VFO is set to between 7.200 and7.300 when I switch bands, the contest window does not show the band change until I tune below 7.200.

When in the main logging window, the frequency window does not change color but the band indication disappears above 7.200 MHz.

Before you start to use RUMlog, you should read at least this: http://dl2rum.de/RUMlogNG/docs/en/pages/FirstSteps.html
You will find out, that you have to set your local used band edges in the Preferences under the QRG tab.